Videos and tutorials / Connect Mobile
Everything you need to use Connect Mobile on Windows or Mac: logging in, calls, transfers, contacts, texting, chat, voicemail, fax and your account settings.
Upon installing and opening the app, the user may enter their extension username into the provided field and click the ‘Next’ button. They can then enter their password in the provided field in the pop-up window and click the ‘Login’ button to complete the log in procedure.
First time users must always complete the Forgotten Password procedure (see below) to set a password before they are able to log in.

A confirmation code is emailed to the address associated with the extension username. Upon entering the 6-digit code in the provided field, the user will be prompted to enter a new password.
Note: The user’s password for Connect Mobile is synced with their password for the nCloud User Portal. This means that if the password is updated through the app, the portal password will update as well, and vice versa.
Upon successful login the app displays the keypad. In the top right of the screen below the name of the extension the app will display a ‘Not Registered’ message while the app connects to the hosted server. It will then display ‘Registered’ once the connection is established and the softphone is ready for use.


When the extension receives a call, a ringtone will sound and a pop-up notification is displayed on the desktop showing the calling name and number. The user can click the green button on the notification to accept the call, or the red button to reject the call.

To make a call, use the dialer on the Keypad to enter the number or extension you wish to call and click the green ‘Call’ button.
Users can also type the number they wish to call or the name of a contact in the field immediately above the dialpad.
Note: When dialing contacts by name, be sure to click the desired recipient in the list that populates above the field before clicking the green ‘Call’ button to dial the correct number. Only part of the name is required to populate the list.
Calls can also be initiated directly from the Contacts page and the Recents page by moving the cursor over the desired entry and clicking the ‘Call’ button that appears.

Once a call has been established, it will be displayed on the right side of the keypad page and listed on the left side above the dialer. The call listing will display the Caller ID and the duration of the call in both locations, along with controls for handling the call:

Note: All calls begin in DTMF mode by default.
Connect Mobile can support simultaneous calls with up to 2 other parties. All active calls are listed on the left side of the screen above the dialer. A second call can be initiated at any time by clicking on the ‘Add Call’ button in the

active call controls on the right, dialing the desired number, and clicking the green call button. The initial call will be automatically placed on hold after the call button is pressed.
While two calls are connected, the currently

active call is displayed on the right side of the page and the Hold button for that call will display the ‘Pause’ icon.
To switch between calls, click on the button with the ‘Play’ icon next to the listing for the inactive call. This will resume the call while placing the active call on hold. When two calls are active, two additional controls appear below the listing on the left side for conference calls and attended transfers:
The Auto Answer and Do Not Disturb (DND) features affect how the app will handle incoming calls and are controlled by the two toggle switches located in the top bar of the app.


Connect Mobile offers both Blind and Attended transfers. To begin a transfer, click on the Transfer button located in the active call controls on the right and select the desired transfer type.

Blind Transfer After selecting a blind transfer, the call will automatically be placed on hold and the call button will display the green Blind transfer icon. After dialing

the transfer destination and clicking the call button, the call is immediately transferred to the destination and a pop-up window will indicate the call has been transferred. Blind transfers can be cancelled by selecting the Blind transfer option from the transfer menu again, automatically resuming the call.
Attended Transfer After selecting an attended transfer the call button will display the green Attended transfer icon. After dialing the transfer destination and clicking the call button, the call is automatically placed on hold while a second call is made

to the transfer destination. The user can then complete the attended transfer by selecting the ‘Transfer’ button that appears under the active call listing on the left. Attended transfers can be cancelled before dialing the destination by selecting the Attended transfer option from the transfer menu again.
Listed contacts can be accessed on the ‘Contacts’ page, where they are organized by type into 4 sections: All contacts, Enterprise contacts, Favorites, and Cloud Contacts. To call a contact from the list, move the mouse cursor over the desired listing and press the blue ‘phone’ button that appears. The list can be sorted by first or last name using the provided button above the list, or searched using the ‘Search Contacts’ field in the top right.

This section contains all the contacts in the phone system’s Global Address Book, which is common to all extensions on the system. Entries in this list can be viewed and edited in the nCloud admin portal. To refresh the list to reflect recent changes, click on the ‘cloud’ icon in the top right corner. Other Connect Mobile users in this listing can be favorited to enable BLF (Busy Lamp Field) or ‘presence’ monitoring of their extension from this page or the favorites tab of the Keypad page.

Contacts of any type can be designated as a Favorite, which then allows them to be displayed in the Favorites list on the right side of the Keypad page for quick access and presence monitoring. To add a contact to the Favorites list, click on the ‘star’ icon that appears when the mouse cursor is moved over the contact listing. Contacts can be removed from the Favorites list in the same manner.

Enterprise contact also allows the user to enable BLF or ‘presence’ monitoring of their extension.
To toggle monitoring, click on the ‘triple dot’ icon that appears when the mouse cursor is moved over the listing and set the BLF switch to the green ‘enabled’ position.

Incoming calls will also display flashing green ‘phone’ icon to the right of their contact listing.
Contacts can be synced with a connected Google or Microsoft 365 account in the Cloud Contacts section. To connect an account, select the account type using the provided checkboxes and click the blue ‘Sync’ button. A pop-up browser window will allow the user to login to their account and authorize the connection.

App call history can be accessed from the ‘Recents’ page, which can be set to display all calls or just missed inbound calls by clicking on the corresponding label above the list.

Entries within this list will show the number, calling name (if any), and the date of the last call to that number. If there are multiple calls to that number, the number of calls is indicated in parentheses.
A user can call a number or contact directly from the Recents page by clicking the blue ‘phone’ button that appears when they move the mouse cursor over the listing. Clicking anywhere else on the listing will display the ‘Call Details’ side bar, which shows specific data for multiple calls to the same number or contact, as well as the duration and call type. When the ‘Call Details’ sidebar is open, the call button is displayed at the top of the bar to the right of the number.

When the user misses a call, a desktop notification will appear and an alert sound will be played. The ‘Recents’ icon on the side bar will display the number of missed calls in red until the user opens the page and views the call history.
If the user has an SMS-enabled DID assigned in the nCloud admin portal, they can send and receive text messages from this number on the ‘Messages’ page.
Existing conversations are listed on the left side of the app in chronological order of the last message sent. Click anywhere on a listing to open the conversation.

Please note NetCarrier’s SMS service does not support group texting, conversations are 1:1 only.

Files up to 25 MB in size can be shared via text by clicking on the ‘paperclip’ icon and selecting the desired file from the file browser that pops up. Most common filetypes are supported including pdf, jpg, jpeg, png, gif, bmp, mp3, wav, mp4 and vcf.
The ‘Chats’ page hosts internal conversations, either individually or in groups, with other Connect Mobile users on the system. Existing conversations are listed on the left side of the app in chronological order of the last message sent. Click anywhere on a listing to open the conversation.

on the ‘search’ field on the right side of the app and type in part of the user’s name or extension to populate the dropdown list. If a chat conversation is already open, click on the ‘new chat’ icon above the existing chat list to display the search field on the right. After entering the name or extension of the desired user, select their name from the dropdown list and click on the arrow icon at the right of the search field to open the chat window.


Voicemail in the user’s mailbox can be listened to and managed from the Voicemail page.

Mailboxes have three folders, Inbox, Saved, and Trash. The user can navigate between these folders using the menu on the left. Each folder will display the number of voicemails it contains to the right of

the label in the menu. The number of unheard voicemails in the Inbox folder are also displayed next to the VM button at the bottom of the dialer on the Keypad page. Voicemail can be listened to or downloaded using the controls located at the bottom of each VM entry. A transcription of the message can be read by clicking the ‘Transcription’ link under the gray bar.
Note: Voicemails in the Trash folder are permanently deleted after a set expiration time (default: 30 days). This expiration limit can be changed in the Voicemail settings section of the ‘My Account’ page or the nCloud user portal.
Multiple VM’s can be selected at once for saving and deleting using the checkboxes. The ‘Select All’ checkbox above the VM listings can be used to check or uncheck every VM in the folder at once.
The blue ‘Refresh’ button to the right of the save and delete buttons can be used to reload the mailbox.
Note: If the user has the ‘email and delete’ feature enabled for their mailbox, voicemails will not show in Connect Mobile.
A user can access either their personal fax or any business desktop fax accounts associated with their extension from the ‘Fax’ page. If there are multiple fax accounts then the user will be prompted to select a default account upon initially accessing the page. Users can always select which fax account is displayed using the ‘Select Fax Account’ dropdown menu at the top of the page. There are three pages within the ‘Fax’ section of the app: Send Fax, Fax Address Book, and Faxes. Users can navigate between these pages using the menu on the left.
Users can send a fax by filling out the provided fields and clicking the ‘Send Fax’ button at the bottom:
Receiver Enter the recipient fax

number, then click the entry in the dropdown that appears. This dropdown menu will also include any entries in the Fax Address Book. Multiple numbers can be added in this way to send a fax to multiple recipients at once.
Subject Enter a subject for the fax Cover Page Template – Select a cover page for the fax. Cover pages can be viewed, added, and edited in the nCloud Admin Portal.
Upload document Clicking on the folder icon opens a file browser window allowing the user to select the file they wish to send as a fax. (file type must be .pdf or .tiff)
This page contains the address book for the fax account. Entries in this list will be displayed in the dropdown menu on the Send Fax page for quick selection. To add an entry to the address book, click on the ‘Add New’ button to the right of the search bar, then add a first name, last name, and number in the provided fields before clicking the ‘Save’ button.

This page contains a log of all faxes sent or received by the displayed account going back 30 days. Each entry can be downloaded or deleted using the provided buttons at the bottom, and displays number, direction, date/time, page count, and status of the fax.
The ‘My Account’ page contains several pages of user configuration settings that control how the user’s extension handles calls, voicemails, and other available features. Users can navigate between these pages using the menu on the left.
Anonymous Call Reject When checked, user extension will automatically decline calls from anonymous numbers (hidden CallerID number). Ring Timer – This determines the number of seconds the user extension will ring on a normal inbound call before going to voicemail. When a forward is active, this setting is overridden by the forwarding settings.
Email Addresses for Inbound Faxes If the user has a personal fax, this determines the email(s) to which inbound fax notifications are sent to. Does not apply to business desktop faxes.
Enable email notification for failed/successful faxes – When checked, user will receive an email notification for failed and/or successful outbound faxes once the transmission is complete.
This setting allows the user to forward calls that are delivered to their extension specifically by a Ring Group.

Note: This setting will only forward calls that are offered to the user extension from a Ring Group. To forward calls that ring or are transferred to the extension directly or via user DID, see the ‘Call Forwarding’ section below.
This setting allows the user to forward calls that reach their extension directly, by call or transfer to their individual extension or DID. Users can choose between two types of forward, Individual or Find Me Follow Me (explained below).
Note: This setting will only forward calls that are offered directly to the user extension or DID and will not affect calls that are offered as part of a Ring Group. To forward calls from a Ring Group, see the ‘Ring Group Forwarding’ section above.
Individual forwards occur for calls that meet certain conditions. To set an Individual forward, navigate to the ‘Individual’ page after setting forward service to Individual and clicking the ‘Update’ button. Unconditional – Forwards all calls to the destination entered in the field.
Fallback FWD Forwards calls to the entered destination only if the initial call fails for any reason, such as the call being declined or the extension being unregistered.
Busy FWD Forwards calls to the entered destination only if the initial call is rejected. Unregistered FWD – Forwards

calls to the entered destination only if the extension is not currently registered on any deskphone or softphone app (Connect Mobile). No Answer FWD – Forwards calls to the entered destination only after ringing for a set amount of seconds. Once a destination is entered in the field a ‘Time Out’ field will appear below that allows the user to set the length of time before the forward takes effect.
A Find Me Follow Me forward allows forwarding to occur based on a schedule, or to multiple other destinations at the same time or in sequence. Schedules must be created in the extension’s nCloud User Portal before they are available for use in this interface. Ring Time – Determines how long the user extension will ring before the forward activates.
Last Fail Voicemail When checked, calls that are not answered at the forwarding destination will be transferred to original user’s voicemail. Not guaranteed if forward destination is an external number.
Users can add a forwarding destination by clicking the ‘Add Extension’ button and filling out the fields that appear. Multiple forwarding routes can be added to forward the call to multiple destinations.

If the user is forwarding their extension to a Ring Group, check the Transfer to Ring group box, then select the extension of the desired Ring Group from the dropdown list on the left, and the desired schedule from the dropdown on the right. Additional Ring Groups can be added using the ‘Add Ring Group’ button if the forwarding destination is going to change based on a schedule.
Note: If the user wishes to forward both direct calls and Ring Group calls, both settings must be programmed separately. They can be forwarded to different destinations if needed. Calls that reach the extension as part of a Call Queue cannot be forwarded.
There are three sections to the Voicemail configuration page which become visible in the menu on the left once the ‘Voicemail’ option is clicked.
This section contains settings for the voicemail-to-email feature. When the Enable box is checked, the system will send a notification to up to two email addresses which will contain the number of the caller, the date/time the voicemail was received, the extension of the mailbox it arrived in, a transcription of the voicemail, and the message itself attached as an audio file to the notification. By default, the emails are sent to the primary and secondary emails associated with the user extension. The ‘Override’ checkbox underneath each field can be used to alter the destination. Once checked, the Forward to Email field will become editable and an alternate email address can be entered.
When checked, the Forward to email and delete from server feature will automatically delete voicemails from the user mailbox upon sending the email notification, allowing the user to manage voicemails entirely via email without the mailbox itself ever filling up. Please note that emails deleted using this feature are permanently deleted and will not appear in the trash folder.
This section contains various voicemail settings, including those related to the mailbox auto-cleaning feature. Max Voicemail length – Controls the maximum voicemail length (in seconds) allowed Move to Trash days – Unheard messages are automatically moved to the Trash folder after this many days Empty Trash days – Messages in the Trash folder are automatically and permanently deleted after this many days. File Encoding – Allows the user to select between file format types for voicemail recordings Whitelist Caller – Allows the user to enter a number from which they can call and check voicemail remotely without being asked for a PIN
This section contains settings related to the user voicemail greeting. Audio must be uploaded to the user’s nCloud User Portal audio library or recorded via the prompts in the Settings section of the voicemail IVR before it is available for use on this page. To record a greeting via the voicemail IVR, dial ‘5’ after calling into voicemail via the button on the dialer and entering the user PIN.
Once recorded, users can select audio for their Standard, Out of Office, and Extended Absence greetings using the provided dropdown menus, and listen to selected audio using the ‘Play’ button to the right each field. Users can select an active greeting using the ‘Choose Greeting’ dropdown menu at the bottom of the page.
This page allows the user to set up automatic rules for their extension to utilize when it receives calls from a specific number. This feature’s most common application is to block calls from specific numbers but it can also be used to transfer calls to a specific destination or voicemail box. Existing entries are displayed after the ‘Number Screener’ option in the menu on the left is clicked. Entries can be edited or deleted using the buttons at the bottom of each entry. To create a new entry, click the ‘Add New’ button and fill out the provided fields:

Number or extension Enter the number that is being screened Description – Enter a short description or label for the entry Action – Select the desired option from the dropdown menu. Calls can be disconnected, transferred to a specific extension or external number, or transferred to a specific voicemail box. Upon selecting an action, the ‘Action Details’ field will appear.
Action Details If the user has selected ‘Disconnect call’ as the action, this field allows them to select an audio file to play before disconnecting the call if desired. If the user has selected either of the transfer options, this field allows them to enter a destination for the automatic transfer.

This option provides quick access to the users’ nCloud user portal without the need to enter login credentials via an in-app browser window. This window will close automatically after 5 minutes of inactivity. By default, the left side menu for navigating the user portal is hidden. It can be viewed by clicking the ‘triple bar’ icon in the top left corner or by re-sizing the window to a larger view.
This page contains a number of additional app settings and diagnostic tools across several pages, which the user can navigate using the menu that appears on the left side of the app. Application Settings – contains settings that control app behavior and appearance:
Devices contains settings that control how the app uses connected devices:
Language Allows the user to choose from available language localizations About & Privacy Policy – Links to different pages of the NetCarrier website via in-app browser window Contact Support – Opens a pop-up window for reporting problems with the app Update Configurations – Updates the app to reflect current settings in the nCloud admin and user portals Test Connection – Diagnostic tool that runs and displays data related to the app’s connection to Internet, the nCloud servers, and connected devices.
Debugging Logs This section contains various diagnostic tools that will assist our Support team in gathering detailed information during the troubleshooting process of any potential issues or malfunction. Should a user encounter any issue in the proper function of the app, please contact helpdesk@netcarrier.com. Exit – Completely closes out and exits the app.
Our U.S.-based support team answers 24/7/365.