Videos and tutorials / Setup
Your new phones ship pre-configured. Here is how to plug them in before your appointment, and what to expect on the day.
Welcome to NetCarrier! Your new phones ship pre-configured and ready to plug in. This guide walks you through setting them up and explains exactly what happens on your appointment day. Please read it before your scheduled window.
Please unbox and plug in all of your phones using Steps 1–4 below, and have them powered on before your scheduled window. That way, our technician can confirm everything registered when we call. If you hit any snags, don’t worry — the technician will help you through them on the call. Detailed photos showing each port on the back of the phone are in the illustrated guide your Project Manager sent
Plug one end of the coiled cord into the bottom of the handset. Plug the other end into the handset port on the back of the phone.
Plug the Ethernet cable into the LAN / Internet port on the phone. Plug the other end into your router or the Internet jack in the wall.
Connect the power supply to the back of the phone and to a wall outlet. The phone will power on.
Skip this if you have two Ethernet jacks at your desk. If you only have one, plug your computer’s Ethernet cable (not provided) into the PC port on the back of the phone. The phone will act as a switch so both devices have Internet.
Once powered on, the phone automatically downloads its configuration — this can take a few minutes. When it finishes booting, your extension appears in the upper-left corner with a green check mark or phone icon. That icon means the phone is registered to the nCloud Connect platform, and you can place test calls.
Note: Any numbers being ported from another carrier will not ring into your new phones until the port is complete.
Questions or trouble during setup? Call 877-255-7733 or email helpdesk@netcarrier.com. You can also ask the technician who calls you at your scheduled appointment.
Our U.S.-based support team answers 24/7/365.